Vibration measurement and diagnostics

PICOMLCD vibration speed and vibration acceleration measuring device
  • One sensor input (One channel)
  • 4 x 16 chr. LCD display with backlight and functional push-buttons
  • User friendly – modular designed – for user specific measuring target
  • USB port for programming (PC or laptop under Win XP, Win 7.0 op. system)
  • ETH (Ethernet) connector for network connection
  • ALARM limit LED display, relay outputs or ALARM outputs
  • Standard analog and accelerometer sensor input
  • TS-32 rail mounting version in BOPLA box
  • Power supply:  24V DC/AC
 P1010212
PICOMAV vibration speed and vibration acceleration measuring device
  • One sensor input (One channel)
  • User friendly – modular designed – for user specific measuring target
  • USB port for programming (PC or laptop under Win XP, Win 7.0 op. system)
  • ETH (Ethernet) connector for network connection
  • ALARM limit LED display, relay outputs or ALARM outputs
  • Standard analog and accelerometer sensor input
  • TS-32 rail mounting version in BOPLA box
  • Power supply:  24V DC/AC
 PICOMAV
PICOMVV  Two-channel device for vibration speed measuring
  • Two sensor inputs
  • User friendly – modular designed – for user specific measuring target
  • USB port for programming (PC or laptop under Win XP, Win 7.0 op. system)
  • ETH (Ethernet) connector for network connection
  • ALARM limit LED display, relay outputs or ALARM outputs
  • Standard analog and accelerometer sensor input
  • TS-32 rail mounting version in BOPLA box
  • Power supply:  24V DC/AC
 PICOMVV
PICOMAA  Two-channel device for vibration acceleration measuring
  • Two sensor inputs
  • User friendly – modular designed – for user specific measuring target
  • USB port for programming (PC or laptop under Win XP, Win 7.0 op. system)
  • ETH (Ethernet) connector for network connection
  • ALARM limit LED display, relay outputs or ALARM outputs
  • Standard analog and accelerometer sensor input
  • TS-32 rail mounting version in BOPLA box
  • Power supply:  24V DC/AC
 PICOMAA
GUI PC software made for measuring vibration speed and vibration acceleration
  • The PICOM devices can be connected to PC or laptop through an ETH 10/100  network connection.
  • The software program automatically stores the measuring results, the ALARM events and any time can be chronologically back controlled.
  • Multiplied PICOM devices can be controlled with one software program.
  • The “post mortem” diary keeps complete chronological graphical diagram of any critical event.
  • User friendly, free adjustment of parameters of analog input level, vibration speed limit, vibration acceleration limit, ALARM level.
  • The software program is running under Win XP or Win 7.0 operation system
 gui2GUI3
Vibration measuring and vibration data collection on deck during flight
P1000834 P1000840
RJK-1CH  analog amplifier and filter equipment
  • Analog input (Upp = 1mV…1V)
  • Frequency range:  f= 0,1Hz….100 kHz – variable depending on the task
  • Switchable signal amplify gain 1x, 10x, 100x – variable depending on the task
  • Different filter characteristics – variable depending on the task
  • Power supply:  24V DC/AC
  • TS-32 rail mounting version in BOPLA box
  • Modular designed devices
  • User friendly – modular designed – for user specific measuring target
 P1010242JK1b
JK-2  analog amplifier and filter equipment
  • Analog input number:  2  (Upp = 1mV…1 V)
  • Frequency range:  f= 0,1Hz….100 kHz – variable depending on the task
  • Switchable signal amplify gain 1x, 10x, 100x – variable depending on the task
  • Different filter characteristics – variable depending on the task
  • Power supply:  24V DC/AC
  • TS-32 rail mounting version in BOPLA box
  • Modular designed devices
  • User friendly – modular designed – for user specific measuring target
 P1000846

JK2b
RJK-3CH analog amplifier and filter equipment
  • Analog input number: 3  (Upp = 1mV…1V)
  • Frequency range:  f= 0,1Hz….100 kHz – variable depending on the task
  • Switchable signal amplify gain 1x, 10x, 100x – variable depending on the task
  • Different filter characteristics – variable depending on the task
  • Power supply:  24V DC/AC
  • TS-32 rail mounting version in BOPLA box
  • Modular designed devices
  • User friendly – modular designed – for user specific measuring target
 P1010237
LNSC-8  eight channels amplifier and filter with low output noise level
  • Analog input number:   8 ch.  (U MIN INP = 1mVpp)
  • Analog output number: 8 ch.  (U MAX INP = 5Vpp)
  • Frequency range:  f= 0,2 Hz….20 kHz – variable depending on the task
  • Switchable signal amplify gain 1x(0dB), 10x(20dB), 100x(40dB) – variable depending on the task
  • Different filter characteristics – variable depending on the task
  • Power supply:  24V DC, or with external power supply 230V AC
  • Mechanical design – installed in BOPLA box
  • User friendly – modular designed – for user specific measuring target
 8chAmplifier